|
Premium Acrylic Distemper:-
No. 1 Premium Acrylic Distemper Here’s why it’s No. 1 :
- Copolymer emulsion based;
- Smooth finish;
- Fast drying;
- Quick recoatable;
- Clean bright shades.
Area Of Application
Interior surfaces of plaster, Concrete/ Brick Work, Abestos Product Data
|
Finish
|
Smooth & Matt
|
|
Supply Viscosity
|
Smooth paste
|
|
Average Coverage Capacity
|
180 -200 Sq.ft per kg per coat (on primed & puttied smooth surface by brush application) Surface Dry : Within 20 minutes (at 30+/- 10 C & 65+/- 5% R.H)
|
|
Interval between coats
|
3 hour minimum
|
|
Thinner recommended
|
Clean tap / potable water
|
|
Primer recommended
|
For New Plaster – Shalimar Wall Neutralising Cement Primer, For Old Painted surface – Shalimar Water Tinnable Cement Primer, Universal White Primer
|
Directions For Use Surface Preparation
Ensure the substrate is dry and free from dirt, dust, grease, oil and loose matter. Method Of Application
After proper Surface preparation, No. 1 Premium Acrylic Distemper can be applied with Brush/ Spray or Roller. After Application of suitable primer, two or more coats of No.1 Premium Acrylic Distemper to be applied allowing an interval of 3/4 hours between subsequent coats. The dilution ratio with water should be 100:70 by weight. Shades Available
Choose From a wide range of shades from our shade card. Packs Available
1 kg/ 2 kg/ 5 kg/ 10 kg/ 20 kg.
|
